For CMYK process printing, our acceptable standards is within 10 percent of the original intended colour. Colour discrepancies will occur within the same print run (Eg. The colour of each individual printout in a single print run may differ from each other by up to 10 percent) Colour discrepancies may also occur in separate print runs of the same artwork on separate occasions (Eg. When reprinting a print job using the same artwork used previously, colours may also differ by up to +/-10 percent even though the same artwork is being used.)
Variancy of Colours
Variancy of colour within the same batch of printing is deemed acceptable if the colour varieties fall within 10 percent of original colour. We cannot be held liable for colour variations between jobs printed in different batches at different ordering periods.
Tolerance of the cutting edge: +/- 1mm
Cutting will not be 100 percent accurate for all 4 sides. Artwork design with border need to take note that the final card might not be 100 percent accurate.
Tolerance of registration for extra finishing
(Spot UV / Hotstamp: +/- 1mm / Die cut / Embross): +/- 1mm
Bubbling from Lamination
Bubbling after lamination is deemed acceptable if it is less than 0.5mm in diameter.